Estevan 鈥� Derrick Big Eagle spent much of his life around drilling rigs. That included building and eventually selling his own rig outfit, Eagle Drilling Services, which had eight rigs. All this means he has a unique perspective when it comes to analyzing the massive contraction in Canada鈥檚 drilling rig fleet, from 811 in Oct. 2014, to 516 today. It could potentially drop another 100, according to the Canadian Association of Oilwell Drilling Contractors, or CAODC, in a recent interview.
Pipeline Newsquizzed Big Eagle about his thoughts on the drilling fleet on Oct. 24.
A lot of this contraction has to do with the fact that drilling rigs have become much more efficient. For instance, when asked how long it took to drill a Bakken well around Stoughton in 2008, Big Eagle said, 鈥淲e were drilling them in seven to eight days.鈥�
鈥淭he first Bakken horizontal took 36 days.鈥�
Now, he said, 鈥淭hey鈥檙e down to five, five and a half.
鈥淓veryone鈥檚 pretty close now. You鈥檝e still got a few of the guys that are still running their old rig that they have before because they鈥檝e used them for 10 years. But could they be more efficient? Absolutely, they could be.鈥�
Asked what has made the biggest difference in improving efficiency, Big Eagle replied, 鈥淭he understanding of the PDC (polycrystalline diamond cutter) bit. The PDC bit came in as new technology for everybody. It took a while to figure out. And once a few people did trial and error, did a little research and development on drilling techniques and procedures, they figured out they could push it.
鈥淓verybody thought it was just pump, pump, pump, and put the volume to it, but was really the drill bits that sped things up.
鈥淎nd, the competitiveness. If you want to work, you鈥檝e got to be the fastest.鈥�
There are many rigs in Saskatchewan, and throughout Western Canada, that have been sitting since the downturn hit five years ago. Many more have been sitting even longer. Asked what he would look for if he were looking to buy and reactivate a 鈥渃old rig,鈥� Big Eagle said, 鈥淩ig up time is No. 1. Is it set up to be rigged up and moved quickly? All of these (in southeast Saskatchewan) pretty much are.
鈥淚 would want to know the last time everything was turned, everything was fired up. When was anything pumped through the lines? Because now you鈥檝e got everything full of rust. That鈥檚 including air lines. How do you get the rust out of air lines? You鈥檙e really taking a chance.鈥�
If rotating gear has been sitting a long time without 小蓝视频 turned, he explained that bearings can actually deform. He said, 鈥淟et鈥檚 say you鈥檝e got a pump, and the bearing it is sitting on. This gear weighs 25,000 pounds, sitting on a couple of bearings. Eventually it鈥檚 going to squash them and make them flat. Now you鈥檝e got to turn them and there鈥檚 a flat spot on that bearing. Knock knock knock. The bearing wears out, and you鈥檝e got a chance of wrecking the whole inside of that pump. Now you鈥檝e got shavings in it.
鈥淭urning the equipment is really important. Seals, O-rings, air hoses, air lines. The elements are going to rot out the air lines and hydraulic lines.鈥�
The weather combined with sitting is the problem. The depreciation, he said, is, 鈥渉uge.鈥�
One larger company, he noted, has a person whose job is to go around to their idle rigs and rotate everything that can turn, every few months.
Cannibalization
Then there鈥檚 cannibalization of rigs to keep others going.
鈥淚t was the angle everyone was left in. When you鈥檙e working for $500 a day profit on a $9 million drilling rig, you鈥檙e not going to go to the store and buy yourself a $2,000 hose 2-inch hose, just because it makes it a little easier. You鈥檙e going to go to one of your rigs that you鈥檝e got shut down and you鈥檙e going to take parts off of it because your trying to survive like that.
鈥淯nless you鈥檝e got the ability to keep the rigs working. Then you don鈥檛 want to steal from another rig, because if you steal from another rig, you鈥檝e got to replace it to get it going again. So, you have to be in a mindset 鈥� am I only going to run 60 per cent of my rigs? And there were companies that did that.
鈥淏ut you have to draw the line in the sand.鈥�
Is there a line where a rig鈥檚 been sitting too long?
鈥淚 think if there鈥檚 been a four to five year sit, you鈥檙e going to have a pile of problems hit you in the face when you start it up. Two years time; a little bit of rust here and there. You鈥檝e probably got a little more time before bearings become flat. But you鈥檙e still going to have hose issues.
鈥淔ive years? You鈥檝e almost got a full retrofit. Past a Level IV. You鈥檙e going to have change hydraulic hoses, air hoses.鈥�
The CAODC recently increased the interval for a Level IV inspection from 1,000 operating days to 2,500 operating days. Big Eagle doesn鈥檛 agree with that, saying the operating pressures are so high now, there鈥檚 too much risk for intervals that long. 鈥淭he rigs are 小蓝视频 run twice as hard as they used to be. I 100 per cent disagree.鈥�
And then there鈥檚 labour
鈥淗ow are they going to draw the people back? You can get the rigs going, but what鈥檚 going to be their draw?鈥� Big Eagle asked.
鈥淟ook at the evolution of technology over the last 10 years. Do you think a 25-year-old drilling consultant out of SAIT is going to want an old jackknife rig? Or he鈥檚 going to want something pre-2010? Not a chance. They want new. They want technology. They want data.鈥�
Old school rigs don鈥檛 see much usage, he noted.
The ultimate fate of an old rig is to be cut up for scrap. He noted larger drilling companies routinely cut up their old rigs.
鈥淭here鈥檚 more value in eliminating a competitor, buying it, than what you get for scrap,鈥� he said.
Is there a foreign market to take some of these idle rigs overseas? Big Eagle said there鈥檚 some interest. 鈥淚 don鈥檛 think any have been successful,鈥� he said, noting Alberta has hundreds more rigs to choose from, and they鈥檙e closer to a port, making those rigs more attractive.
The whole fleet in Canada is overbuilt. 鈥淲e鈥檝e got too many,鈥� Big Eagle said.
